Beneteau First 40.7
Bateau de propriétaire n’ayant jamais été loué.
Large saloon – 3 double cabins – 1 bathroom – All hatches equipped with roller blinds in good condition – Large cockpit, cushions in good condition, awning.
Double stainless steel sink
Hot and cold water mixer tap
Oven on gimbals
Integrated trash can
Upholstery in good condition – Plenty of storage
Liferaft Plastimo Transocean ISO 6P T1A>24H. (09-2019.)
Yanmar 3JH4CE 29KW, 40hp engine,
number of hours estimated between 1900 and 2100 hours (change of control panel) Currently 700 H + estimate.
Replacement of the drive cone June 2021.
Raymarine electronics (autopilot with S3 calculator + gyro,
P70 2019 control, Lecombe and Schmitt cylinder completely overhauled 2019, smartcontroller remote control.
VHF ASN Gps integrated, AIS transponder coupled to the C80.
C80 display with cartography.
Sarsat Ocean Signal SafeSea E100G beacon GPS.(new battery)
Batteries (2) service Vetus deepcycle DC 110 August 2020
PowerMarine 85AH-850CA engine battery installed Nov 2021
ATMB marine wind generator D350 12V ,
100w removable Sunpower flexible solar panel with A350 hybrid regulator (10-2019) Pure sine inverter
Custom stainless steel gantry for annex, wind turbine
Convertible roof NV equipment (Sept 2019)
Mooring: Quick 1000 W electric windlass
1 Chain of 10mm with Britany anchor cable 20 Kg
1 Chain of 8mm with anchor cable Britany 20 Kg
2 floors of spreaders
Complete set of sails:
– Mainsail (North) semi-battened triradial 3 reefs TBE, Easy-bag, cover if racing, lazy jack, Wichard boom brake,
– Genoa (North) triradial on furler Profurl C420 TBE, anti-UV band
– Dacron Elvström horizontal genoa for TBE training
– Solent arisable (mylar taffeta) on removable kevlar forestay sheathed BE, set up by pelican
– Gennaker on TBE furler, mounted on a removable carbon bowsprit
– TBE asymmetric spinnaker, sock
– TBE symmetrical spinnaker
– Carbon pole
– Fluorescent orange storm
Dyform standing rigging (forestay 2017, rest 2019, backstay cylinder overhauled 2019)
Running rigging in very good condition, some new halyards in Dyneema sk78 (including muffled gennaker)
Custom aluminum swim ladder. Hot/cold water hand showe
Antifouling self polishing June 2021
Change of self-aligning rudder bearings.
To apply for membership, please fill out the following form
The information you provide will remain strictly confidential.